Stainless steel finish - semi-fine grinding semi-fine grinding with 800 # of belt grinding back and forth in front of the workpiece according to the method of grinding the workpiece on three sides, mainly for seams previous process appear to be corrected and prints produced after coarse grinding further finely ground, leaving the imprint of the previous process to be repeated grinding, Nanchang mirror stainless steel, reached the surface without scratches, basic brighter. This step should be able to reach the surface roughness R0.4mm. (Note that this step is not to create new scratches and bumps, because they can not repair these defects in a later step.) Mirror stainless steel band / plate polishing - grinding grinding, mirror stainless steel sheet, the belt main 1000 # Is the front steps of forming a small ridge appears correction grinding, grinding method and the same. The step to achieve the goal is part of the joint grinding workpiece grinding portion not disappeared, mirror stainless steel, surface brightness further by grinding the workpiece after this step was close to the mirror effect, the surface roughness should You can reach R0.1mm. Nanchang mirror stainless steel | Total Stainless Steel | stainless steel mirror 304 were issued by the Dongguan City Metal Materials Co., Ltd. to provide. Nanchang mirror stainless steel | Total Stainless Steel | stainless steel mirror Dongguan City issued a total of 304 Metal Materials Co., Ltd. (www.dggongfa.com) (www.dggongfa.com) this year introduced a new upgrade, the above picture is for reference only, please dial this page or on the telephone picture to obtain the latest information, contact: Zhao students.